A rural failure usually announces itself as either water everywhere or no water at all, and those are different problems with different first steps.
First, work out what stopped
Cold water running at a tap means the supply is fine and the fault is in the heater. No water anywhere means the pump, the pressure tank, the breaker or the well itself, and a heater repair will not fix it.
Stop the water at the heater
Turn the valve where the cold line meets the tank. Inflow stops, so the volume on the floor stops growing, though whatever is already inside still escapes through the break. On a well system the pump keeps pushing until that valve is shut, which is why it comes first.
Cut the fuel
At the appliance: the propane or gas valve if you can reach it without stepping in water; on an electric unit, the breaker. Letting a heater fire while it drains is how a repairable fault becomes a new unit.
Propane safety
Smelling propane is a call to the supplier, not to a plumber. Get out, leave the switches alone, and ring from outside the property line. The gas gathers at floor level, so a basement or crawl space is the last place to go investigating.
Freeze damage
A split pipe or a cracked exchanger after a cold night is a common rural failure. Shut the supply off, and be aware that thawing can release a second leak once the ice gives way.
What can wait
A working supply with no hot water at the tap, a seep caught in a bucket, a burner that wants cleaning, and an appliance that will not light are all repair visits. They go on the repair page. Where the vessel itself has gone, the conversation moves to replacement instead.