Commercial water heating in a mountain community is small-scale and supply-limited: guest accommodation, a workshop, a small food business or a property with several buildings.
The water supply is the ceiling
On a well, the pump, storage and recharge set what the property can deliver. On hauled water, storage volume does. Either way, the commercial demand is planned against the supply rather than against the appliance's rating.
Recovery for guests
Guest accommodation cannot ask people to wait twenty minutes for hot water. Recovery and distribution matter: a unit that keeps up at breakfast, and pipe runs short enough that hot water arrives quickly.
Several buildings, separate systems
A main building, cabins and a shop rarely share a convenient layout. Separate units at each building avoid long runs that lose heat and freeze in winter, even though there are more of them to maintain.
Altitude and venting
Gas appliances here need the correct altitude rating, and the flue has to suit the appliance and the wind. A back-drafting flue is a safety problem, not an efficiency one.
Freeze protection for plant
Any equipment in an unheated building is exposed. Insulation, heat trace and a plan for the coldest nights belong in the installation, and a frozen exchanger is a replacement rather than a repair.
Planning the outage
A guest property measures an outage in hours; a workshop may tolerate a day. Whichever applies, that limit decides whether the work runs overnight or between bookings.
Repair or replace
Burners, controls, elements, valves and expansion tanks all have a service life. A shell that has failed, or an exchanger that has cracked, belongs to a different category. Units installed as a set tend to age as a set, which is better planned together.
The emergency page covers a failure in progress, and installation covers specifying a unit on this supply and at this altitude.