A corridor parcel gets wind, dust and a supply that is not always clean. Upkeep here is about removing what arrives and preparing for the cold.
Drain and look
The tank is emptied until the water runs clear. What comes out describes the supply better than any test: grit points to a well, and its volume sets how often the job is repeated.
The sacrificial rod
The anode is checked by removal, because there is no other way to judge it. A consumed rod in an otherwise sound tank is a cheap save.
Relief valve and pressure
The valve is operated and observed. Any discharge from its pipe is investigated rather than shrugged at, and on a pump-fed property a pressure cycle that swings hard gets attention too.
Air and combustion
Dust in the burner compartment and the air openings starves the flame, soots the flue and wastes fuel. Clearing it is a combustion task.
Ahead of the freeze
Exposed lines are lagged, trace heating is tested, and the space is assessed for how cold it falls on a January night. A tankless exchanger left full through a freeze is the expensive outcome.
Where upkeep ends
Elements and valves can be renewed; a split shell cannot. Start with repair, and move to replacement when the vessel has gone.