Replacement in this neighbourhood is rarely just an appliance swap. The houses were built between the mid-1950s and the 1970s, and the mechanical arrangements that suited them then are often the constraint now.
The signals
A tank leaking from the shell, a rusted base, water that stays rust-coloured after a flush, or a unit that has needed several repairs in a short period. Age is a factor, but a maintained tank at year twelve with a sound shell is still a candidate for repair rather than replacement.
What original construction means
The closet. Built for a tank of a particular size, often with minimal clearance. A larger replacement may not fit without altering the opening, and a tankless unit needs different clearances again.
The vent. Sized for the original appliance. A replacement of a different class may need a new route, which under a low roof usually means a side wall rather than the roof.
The gas line. Possibly adequate, possibly not, depending on what is going in. A high-input unit makes this a real question rather than a formality.
The shut-off and connectors. Original valves often will not reseal once closed. Replacing them during the swap is cheaper than discovering it during the next emergency.
Removal on a hillside lot
Graded pads, stepped paths, driveways on a slope and gated entries all affect how a full tank leaves the property. Draining it first is not optional; the weight and the route decide how many people and how much time the removal takes. This is a scheduling fact rather than a price claim, and it is worth describing on the call.
What the work includes
Drain and disconnect, remove and dispose of the old unit, set and connect the new one, vent to code, brace the tank, fill and test, and arrange the permit inspection. Where the property has a guest house or pool house, confirm which unit is being replaced, because they are separate installations.
Planned versus urgent
A working unit near the end of its range is best replaced on a chosen day, with the permit arranged and the access understood. A failed tank makes the same job happen with water on a graded pad, where it will find its way downhill. The emergency page covers the shutdown if that has already happened.