Every installation on this hill starts with two questions: what can feed the heater, and how cold does the space get. The model comes third.
Start with the wall
A unit on an outside wall facing the wind behaves differently from one in a heated utility room. Before anything is specified, the wall is assessed for how it sits through a January night, whether a full tank can be carried to it, and whether a person can reach the fittings without moving furniture or machinery.
Fuel on this hill
Where a gas main reaches the parcel, it is the simplest supply. Where it does not, propane is usual, and that changes the installation: a dedicated regulator, an orifice matched to the fuel, and a tank large enough to feed the appliance alongside everything else on the property. Electric is the fallback where neither is practical, and it brings its own circuit requirements.
Cold protection that works
Lagging on any run that passes through an unheated space, trace heating where the run is long, and a position above freezing. These are not optional extras on a hilltop; they are part of the installation.
Exhaust and wind
A flue has to terminate where it can draft, clear of windows, doors and the roof line, with the manufacturer's clearance to combustibles maintained. On an exposed slope, a termination that works on a still day can fail in a gust, which is worth thinking through before the hole is cut.
Sheds, barns, outbuildings
Outbuildings that need hot water are usually better served by a small unit at the building than by a long branch from the house, which loses heat and is the first thing to freeze.
Sign-off
The county inspects the finished work: flue, clearances, relief discharge and bracing.
A failed unit is covered on the replacement page; on-demand options are on the tankless page.