Installation out here follows the site: how water arrives, where the unit can sit, and what the cold does to that place.
Start with the supply
Basin wells vary in yield and in what they carry. A filter ahead of the heater catches grit, and the pressure tank and pump setting are checked so the appliance is not fighting surges. Where supply is hauled, storage and leak-free connections matter most.
Freeze protection
An unheated shed or exterior closet will freeze in winter. Insulation, heat trace on exposed runs, and a location that stays above freezing are the practical measures; a tankless unit needs them most.
Gas rating and venting
A gas appliance must suit its fuel and its installation altitude, and the flue has to draft in desert wind. A termination that works on a still day can spill in a gust, so the location is chosen with wind in mind.
Sizing for a rural parcel
A main house, a guest room and a workshop on one parcel rarely share demand. A separate unit at the outbuilding usually beats a long run that loses heat and risks freezing.
Clearances and fire
The area is dry and fire-prone, so equipment is kept clear of stored material and accessible for maintenance. Nothing is stacked against the appliance.
The county permit
Los Angeles County permits and inspects the installation, and California requires a storage tank to be braced against earthquake movement. The inspection covers venting, clearances and the relief discharge along with the strapping.
A swap is covered on the replacement page; on-demand units and their risks are on the tankless page.