Paris sits inside the Acton area, where most homes are on treated district water rather than a private well. That makes installation more predictable than on the surrounding hills, with fewer water-quality surprises.
Supply and pressure
District water arrives at a steady pressure, but properties at the edge of the boundary may be on a well instead. The supply is confirmed first, because a pump-fed system needs different attention from a treated main. Pressure is checked either way, and a reducer fitted where it runs high.
Fuel
Natural gas where a main serves the property, propane where it does not, electric where gas is impractical. A propane appliance needs its own orifice and regulator and a tank sized for the draw.
Venting
The flue must match the appliance. On a single-storey ranch house a side-wall termination is often straightforward, subject to clearances from windows, doors and the boundary.
Outbuildings
Equestrian properties frequently have tack rooms, barns, guest quarters or a workshop. Each is a candidate for its own unit, and a small electric or propane heater at the building is usually simpler than extending a hot-water run.
Frost
Valley-floor nights are cold enough to freeze an exposed line. Insulation and, where needed, trace heating protect the run; an unheated outbuilding needs a plan for the coldest nights.
Inspection
The county inspects the work, including the flue, clearances, relief discharge and the bracing a storage tank requires.
A swap is on the replacement page; on-demand units are covered under tankless.