A tankless unit is a good answer to a specific problem and a poor answer to a general one. On a windy hill above the highway, the deciding detail is that water stays inside it between draws.
The water it keeps
After a tap closes, the exchanger remains full. A unit on a wall that takes the weather, or in a shed that is not heated, will freeze that water, and a split exchanger is not a part that gets swapped. Keeping the unit inside the warm envelope is the measure that holds.
Two fixtures at once
Capacity is quoted at a temperature rise, and winter ground water is colder than summer. A unit that runs a shower comfortably in June may struggle with two in January, so the sizing conversation starts with how many outlets run together and what the incoming water is doing.
The filter is the tell
Grit from the road and the slope collects at the inlet strainer. When it clogs, flow drops and the unit may not fire at all, which is why cleaning it belongs in the routine rather than the repair list.
Scale on the coil
Hardness sets how quickly the coil scales. Fitting service valves at installation turns descaling into a job with a hose and a pump instead of a dismantling exercise.
Where it earns its place
A tack room, a workshop, a distant bathroom: hot water at the outlet, without a branch run that cools and freezes.
What kills one
A freeze split, a heavily scaled exchanger, a cracked housing. Inlet filters, flow sensors, igniters and boards are the parts that can be renewed.
The maintenance page covers the routine, and installation covers siting.