Tankless units make sense on rural parcels where buildings are spread out and hot water has a long way to travel. They also demand more of the water than a tank does.
Well water and the inlet filter
A tankless unit has a fine inlet filter that protects the flow sensor and the exchanger. Well grit loads it quickly, and a partially blocked filter reduces flow until the unit stops firing reliably. Cleaning it on a schedule is part of living with a tankless unit on a well.
Where sediment is heavy, a pre-filter ahead of the unit protects the appliance and pays for itself in fewer service calls.
Freeze protection
Water remains in the exchanger between draws. In an unheated barn or garage, that is a freeze risk on a cold night, and a cracked exchanger is usually a replacement rather than a repair. Options include keeping the space above freezing, a recirculation strategy, or placing the unit indoors.
Propane sizing
A tankless unit draws a high input while running, and a propane tank has to be able to supply it, with a regulator sized for the demand. A tank that runs a range and a furnace may not have the spare capacity a tankless unit wants.
Descaling
Hardness on private wells varies, so the descaling interval is set from the water. Scale in the exchanger shows up as falling temperature at high flow and then as error codes.
Point-of-use for outbuildings
A small unit at a barn, a guest house or a workshop avoids a long run and delivers hot water where it is used. That is often the strongest argument for tankless on a property like this.
Repair limits
Sensors, filters, igniters and flow components are serviceable. A scaled or frozen exchanger is usually the end of the unit, which is why filtration and freeze protection matter more here than the warranty.
The maintenance page covers the interval work, and the installation page covers siting and fuel.