In a small canyon house, a tankless unit earns its place by freeing the closet a tank occupied and by heating water only when it is wanted. The trade is that it notices the cold and the water quality.
Where it hangs matters most
An exterior wall takes the wind, and a crawl space under a raised cabin gets colder than the house above. Water remains in the exchanger between draws, so a hard freeze can split it. A position inside the thermal envelope, or a space kept above freezing, is the safe choice.
Propane and gas capacity
Where there is no mains gas, the unit runs on propane, and the tank and regulator must carry the high input while it fires. A tank sized for a cooker and a heater may not have the spare capacity, and the shortfall shows as a unit that drops out.
Filtration for local water
Well and small-system water can arrive with grit. The inlet filter catches it and protects the flow sensor and exchanger, but it fills quickly. A pre-filter upstream reduces how often someone has to clean it.
Descaling
Hardness varies with the source and the season. Scale cuts temperature at high flow and then throws codes. Fitting service valves at installation makes descaling a manageable job rather than a dismantling one.
Point of use in outbuildings
A workshop or a guest cabin is a natural fit for a small unit: no long run to keep warm, no tank to freeze, and hot water only at the tap that needs it.
What cannot be repaired
Filters, sensors, igniters and boards can be renewed. An exchanger split by ice or choked by scale usually cannot, which is why siting and filtration matter more than the warranty.
The maintenance page covers the routine; the installation page covers siting.