Tankless units appeal in the desert for practical reasons: no standby tank to keep hot, a small wall footprint, and hot water only when it is wanted. The climate also makes them less forgiving.
Freeze risk is the first question
Water stays in the exchanger between draws. On a freezing night in an unheated garage or an exterior wall, that water can expand and crack the exchanger, which is usually the end of the unit. Built-in freeze protection helps, but it depends on power being present and on the unit being installed where it can operate.
The safer arrangements are an indoor location or a space kept above freezing, with insulated pipework on the exposed runs.
Hard water and the exchanger
Groundwater here averages about 140 mg/L of hardness. Scale collects in the exchanger, reduces temperature at high flow, and eventually triggers error codes. Descaling on an interval set by the water is not optional maintenance in this area; it is what keeps the unit working.
Dust and the inlet filter
Desert wind loads the inlet filter faster than a city installation would. A partially blocked filter reduces flow, and the unit behaves as though it is failing. Cleaning it is quick, and doing it regularly avoids a service call.
Propane or gas supply
Where there is no piped gas, a propane unit needs the correct orifice and a tank and regulator that can carry the higher input while it runs. A tank sized for a range and a furnace may not have the spare capacity.
Where tankless fits best
A point-of-use unit at a distant bathroom, a shop or a guest room avoids a long run and delivers hot water where it is used. For a whole house, the supply and the freeze plan decide whether it is sensible.
Repair limits
Flow sensors, filters, igniters and control boards are replaceable parts. A scaled or frozen exchanger usually is not, which is why the maintenance matters more than the warranty.
The maintenance page covers the interval work, and the installation page covers siting.